Double Head Sheet Metal Nibbler Saw Cutter Cutting Tool Drill Attachment 12mm

Description

Features:
*Double-head metal cutter, the
knives head can be positioned 360 degrees in any direction, and both heads can be used;
* Various straight lines, curves, arcs or other irregular lines and shapes can be cut, and the operation is simple;
*Easy to install, hexagonal shank connector, compatible with electric drills, pneumatic drills and other tools;
*Suitable for ordinary iron plate under 1.8mm, stainless steel plate under 1.2mm, copper, aluminum plate, plastic plywood under 2mm, etc.;
Instructions for use:
*When equipped with a thin plate hole opener, first insert the front end of the electric drill and the cutter into the round hole of the hole opener, connect the cutter to the electric drill and lock it, and then tighten the three sticks and stigma screws on the shelf. , To prevent the hole opener frame from sliding; insert the ruler rod into the small square hole of the frame with the left to right positioning pin facing up, and finally adjust and tighten the top screw according to the size of the cut arc to fix the ruler rod firmly , To ensure the accuracy of cutting round holes.
*When cutting standard arcs, a thin plate hole opener should be used to keep the arc cut surface smooth and beautiful. You should also drill a 3 mm positioning eye first, then drill a 12 mm hole, and extend the cutter head into the hole. Cut inside and outside circles.
P
arameters:
Colour:as shown
Material: metal + plastic
Speed: 1500-3000 rpm
Minimum cutting radius: 12mm
Product size: about 18*8.5*5cm
Weight: about 450g
Package list:
1 piece of double-head sheet metal cutter
1 piece wrench
On Oct-01-20 at 04:49:10 PDT, seller added the following information: